Audio Crew

Serving the Greater Moncton Area and All of New Brunswick

624 Salisbury Rd, Moncton, NB E1E 1B8, Canada 506-858-2739
  • Home
  • Services
    • Car Audio
    • Marine Audio
    • Motorcycle Audio
    • Remote Starters
    • UTV and Side-by-Side Upgrades
  • About Us
  • Location
  • Contact Us
  • Facebook
  • Instagram

Product Spotlight: Thinkware U1000 Plus Dash Camera

Thinkware U1000 Plus

If you are shopping for a premium dash camera with a high-resolution image sensor, the Thinkware U1000 Plus should be on your shortlist. This solution can record video in 4K resolution and is available with a secondary camera to capture what happens behind your vehicle. Let’s take a close look.

Design of the Thinkware U1000 Plus Dash Camera

The U1000 Plus is a low-profile camera that mounts at the top of your windshield. Rather than a square or round body, the bulk of the camera sits flat against the glass. This design leaves a lot of clearance for the sun visor and rearview mirror.

The main camera can be tilted up or down to ensure the system works with windshields with varying rakes. The camera body is 4.33 inches tall, 2.55 inches wide and 1.18 inches thick. On the left side of the chassis are power connections, a port for an external radar sensor and the optional rear camera. The rear camera uses a USB connection, so you shouldn’t have issues with RF interference. Thinkware includes a hardwire installation kit with the camera. You can upgrade to the OBD-II power cable if you don’t want any of the wiring in your vehicle modified. This is a wise investment for leased vehicles.

Thinkware U1000 Plus
The right side of the chassis has the Micro SD memory card slot, the reset button and the microphone.

Once installed, the camera body has the manual recording button in the center and the Power, Wi-Fi and voice recording buttons in the upper left corner. LEDs across the top indicate when the unit is on, when Wi-Fi is enabled, and when the GPS receiver has locked on enough satellites to pinpoint your location.

Thinkware U1000 Plus

Thinkware Dash Camera Specifications

This camera features a Sony IMX515 STARVIS-Series image sensor that can record at up to 3840 x 2160 pixels at 30 frames per second. It can also be configured to record in 2K mode at 2560 x 1440 pixels at 60 frames per second. The viewing angle is rated at 135.6 degrees, offering a good balance of detail and field of vision.

The rear camera features a Full HD-quality image sensor that records 1920×1080 pixels at 30 frames per second. Both the front and rear cameras have a High Dynamic Range (HDR) mode that compresses the light and dark parts of the image to make objects in shadows, or that might be washed out by a bright light source more visible. Low-light performance is further enhanced with Thinkware’s Super Night Vision 3.0. This processing reduces noise when light levels are low to keep videos clear and sharp.

Thinkware U1000 Plus
The Wide Dynamic Range mode compresses bright areas and brightens dark parts of the image to make everything more visible.

Video files are stored using the HEVC format H.265 to maximize file storage. With the 64GB card included, the system can store up to 151 minutes of video in a dual-camera solution. You can increase the size of the memory card to 512 GB for an incredible 1229 minutes of storage.

You can upgrade the U1000 Plus to a five-camera system using Thinkware’s optional multiplexer and three additional cameras. This is an ideal solution for taxi, limousine and rideshare applications.

Thinkware U1000 Plus
The U1000 Plus can be upgraded with the optional multiplexer module and additional cameras for better coverage.

Parking Mode Protection

The Thinkware U1000 Plus includes several parking mode options. In energy-saving mode, the camera only stores video when the onboard accelerometer detects impacts. Motion and Impact mode allows the camera to watch for vehicles or people entering the field of vision along with impact sensing. The camera stores a 20-second video that starts 10 seconds before the event trigger. Time Lapse mode records constantly at two frames per second.

The U1000 Plus can be upgraded with Thinkware’s optional radar module. Rather than monitoring the area in front of the vehicle using the image sensor, the radar sensor detects someone or something approaching. This dramatically reduces current consumption, so there is less draw on the vehicle battery.

Thinkware U1000 Plus
The optional radar sensors can dramatically reduce current draw when using parking mode.

Wi-Fi Connectivity

You can use the Thinkware Dashcam Link app on your Android smartphone, iPhone, or tablet to view video files stored on the system. Once connected, your installer can adjust the system settings and fine-tune the viewing angle to ensure maximum coverage.

The Thinkware Connected app gives the U1000 Plus Cloud-based connectivity. If you have a mobile hotspot, or the dashcam can connect to Wi-Fi at your home, you can view what the camera sees on your phone. You’ll also get impact notifications when parked. The vehicle operator can send an emergency message to the registered contact by pressing the REC button on the chassis for three seconds. Parents or business owners can review the vehicle’s operational history to review use and driving behavior.

Advanced Driver Assistance Systems

Modern video processing technology allows the U1000 Plus to warn the operating. These Advanced Driver Assistance Systems (ADAS) include Front Vehicle Departure Warnings (FVDW), Forward Collision Warnings (FCWS) and Lane Departure Warnings (LDWS). Notifications about approaching a vehicle too quickly or crossing the lines on the side of the road can help prevent serious accidents.

Thinkware U1000 Plus
ADAS features like Forward Collision Warning integrated with the Thinkware U1000 Plus can help prevent serious accidents.

If you are shopping for a premium dash camera with a high-resolution image sensor, the Thinkware U1000 Plus should be on your shortlist. This solution can record video in 4K resolution and is available with a secondary camera to capture what happens behind your vehicle. Let’s take a close look.

Upgrade Your Vehicle with a Thinkware Dash Camera

We all know that having a dash camera is the best way to protect yourself from fraud and false accusations. It’s also an ideal solution for capturing those “I can’t believe that just happened” moments. When upgrading your vehicle, drop by a local authorized Thinkware retailer and ask about the U1000 Plus system. They can provide you with a quote that includes expert installation.

You can learn more about Thinkware products like the U1000 Plus by visiting their website. Their dealer locator makes it easy to find a retailer near you to help design and install a premium dash camera system.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Filed Under: ARTICLES, Driver Safety, PRODUCTS, RESOURCE LIBRARY Tagged With: Thinkware

Product Spotlight: Rockford Fosgate PP4-NT

Rockford Fosgate PP4-NT

Not long ago, we took a look at the impressive PPS4-10 10-inch Punch Pro midrange drivers from Rockford Fosgate. While they are great for keeping up with a trunk full of subwoofers, what works in terms of reproducing those high frequencies? This spotlight focuses on the Rockford Fosgate PP4-NT Punch Pro tweeter. Let’s check it out!

Rockford Fosgate PP4-NT Specifications

The PP4-NT is a one-inch diameter aluminum dome horn tweeter designed for SPL systems. The tweeter is rated to handle 50 watts of power continuously and 100 watts maximum. The driver has a nominal impedance of four ohms and has an incredible efficiency rating of 105 dB SPL when powered with one watt and measured at a distance of one meter.

The Rockford Fosgate PP4-NT tweeters are sold individually. So, if you need a pair, then you have to buy two of them.

Rockford Fosgate PP4-NT
The raw PP4-NT Tweeter (left), with the mounting flange (center) and with the through-panel clamp (right).

Punch Pro Tweeter Features

As mentioned, the PP4-NT is based around an aluminum diaphragm and is powered by a compact neodymium magnet. The voice coil is formed from high-temperature Nomex to help ensure reliability. This is all housed in an aluminum chassis that improves heat extraction from the voice coil assembly. To increase efficiency, the tweeter uses a horn design with a pointed phase plug.

Electrical connections are handled by a pair of spring-loaded chrome terminals on the bottom of the housing. The terminals are designed to allow wires to be inserted from underneath the tweeter, preventing wires from protruding and increasing the overall size.

Rockford Fosgate PP4-NT
Electrical connections are made using a pair of spring-loaded terminals on the bottom cap.

SPL Tweeter Mounting Options

Rockford Fosgate includes two mounting solutions for the PP4-NT. If space is at a premium, then the compact outer trim ring will screw down into the body and clamp over materials up to 0.35 inches thick. Your installation technician will need access to the back of the mounting location to complete this installation.

Alternatively, the tweeter can be flush mounted through a 2.52-inch hole using the provided removable mounting flange.

With the compact mounting ring, the tweeter body is 2.52 inches in diameter and the ring is 2.09 inches across. The surface mounting ring measures 3.64 inches across.

Rockford Fosgate PP4-NT
The included mounting flange allows the tweeter to be surface-mounted.
Rockford Fosgate PP4-NT
Mounting dimensions for the two installation options.

Crossover Options

The PP4-NT includes a built-in 6dB/octave 4kHz crossover. This is equivalent to using a four-microfarad capacitor wired in series with the voice coil. You can also use the tweeter with the PP4-X Punch Pro passive crossovers. The crossovers are designed to apply a 3 kHz low-pass filter to whatever four-ohm Punch Pro midrange you choose. They also add 0, -3 and -6 dB output attenuation options for the tweeters. If you don’t have a DSP and amplifier channels dedicated to the tweeters, then the PPS-X crossovers are a wise investment.

Rockford Fosgate PP4-NT
The optional Punch Pro passive crossover networks add output attenuation options to the PP4-NT installation.

Louder Than Loud for Music Fanatics

If you are working on building a car audio system designed to play music at rock concert levels, visit a local authorized Rockford Fosgate retailer and ask about the PP4-NT tweeters and the rest of the Punch Pro line.

You can find a local authorized Rockford Fosgate retailer at their Dealer Locator. Be sure to follow Rockford Fosgate on Facebook, Instagram and YouTube to learn about their new products and the amazing events they attend each year.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Filed Under: ARTICLES, Car Audio, PRODUCTS, RESOURCE LIBRARY Tagged With: Rockford Fosgate

Product Spotlight: Rockford Fosgate PPS4-10

Rockford Fosgate PPS4-10

What do you do when you need midrange speakers capable of keeping up with a pair of 15-inch Power Series subwoofers in the back of your SUV? The answer is the Rockford Fosgate PPS4-10 Punch Pro 10-inch speaker. These beasts boast a subwoofer-sized voice coil and handle 350 watts of power to ensure every word remains clear and audible over all that bass. Let’s dive into the details!

Rockford Fosgate Punch Pro PPS4-10 Features

The PPS4-10 is a high-efficiency midrange speaker with a massive 10-inch size. Sold individually, these speakers achieve an impressive efficiency of 96 dB SPL with just one watt of power measured at one meter. Each speaker includes a sturdy mesh grille for added protection in indoor installations.

Built on a stamped steel chassis, the PPS4-10 features a large 8.25 by 1-inch ceramic magnet. The basket uses the StampCast design, which provides the structural rigidity and provides the sleek look of a cast-aluminum design. Additionally, the mounting flange includes four slotted holes, allowing precise alignment during installation. Despite its large diameter, the speaker requires only 4.06 inches of mounting depth.

Rockford Fosgate PPS4-10
The PPS4-10 features a massive 8.25 by 1-inch magnet to maximize efficiency.

Punch Pro Midrange Soft Parts

The speaker’s cone is made from fiber-reinforced pressed paper, keeping the cone mass low to help the speaker’s efficiency. A treated textile W-shaped surround connects the cone to the basket, while a high-temperature 2.58-inch aluminum voice coil sits at the core, topped by a machined aluminum phase plug. Beneath the cone, a poly-cotton spider delivers excellent control and durability.

For electrical connections, the PPS4-10 uses spring-loaded terminals mounted on the basket. Fatigue-resistant tinsel leads, sewn to the spider, prevent noise at high power levels.

Rockford Fosgate PPS3-10
The lightweight cone is made from pressed paper to deliver excellent efficiency.

PPS4-10 Specifications and Application

The PPS4-10 has a resonant frequency (Fs) of 53.5 Hz, an equivalent compliance (Vas) of 1.24 cubic feet, and a total Q (Qts) of 0.26. With a maximum one-way excursion (Xmax) of 4.6 mm, it offers impressive performance for a midrange speaker.

To explore potential applications, we conducted simulations based on an estimated effective cone area for the PPS4-10. In infinite baffle setups, the mids perform with a -3 dB frequency of around 200 Hz.

Each speaker requires a minimum of 0.2 cubic feet of airspace for sealed enclosures. This setup delivers a -3 dB frequency just above 160 Hz. To bridge the frequency gap between these mids and a subwoofer, consider a woofer like the Prime R2 or Punch P1, which can comfortably play up to 150 Hz.

If you need the mids to handle lower frequencies, your installer can build a vented enclosure with a net volume of 0.25 cubic feet with a vent tuning frequency of 80 Hz. This configuration extends the output to just under 100 Hz. Unless you run massive, heavy subwoofers, you should be able to use a high-pass crossover at 100 Hz and still have the system sound dynamic and punchy.

Rockford Fosgate PPS4-10
Predicted frequency response of the PPS4-10 in 0.2 cubic feet sealed (red) and 0.25 cubic feet ported (red).

Rock Out with the Rockford Fosgate Punch Pro Mids!

If you need midrange speakers to keep up with a wall of subwoofers, the Punch Pro series, including the PPS4-10, is an excellent choice. The Punch Pro lineup also features 6.5-inch and 8-inch mids to accommodate different installation spaces. All three sizes are available in four-ohm configurations.

You can find a dealer near you using the locator tool on their website. Be sure to follow our friends from Tempe on Facebook, Instagram and YouTube to keep up with new product releases and the events they attend.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Filed Under: ARTICLES, Car Audio, PRODUCTS, RESOURCE LIBRARY Tagged With: Rockford Fosgate

Product Spotlight: Compustar Pro T13 Remote Starter

Compustar Pro T13

Only a handful of reputable companies manufacture remote car starters, but one stands out for its innovative solutions—Compustar. Their flagship Pro T13 is the industry’s longest-range radio-frequency car starter remote. Combine that with features like proximity unlocking, an LCD screen, and intuitive controls, and this is the ultimate remote control solution. Let’s explore why range is vital to making your vehicle more comfortable.

Compustar Pro T13 Remote Control

Compustar makes it easy for mobile enhancement retailers to design a car starter system tailored to your vehicle and needs. The Product Specialist you are working with can choose from several control modules, with the right one depending on your car’s specifications and desired features. For instance, the CM-X controller is ideal if your vehicle has a manual transmission. For consumers, these decisions typically happen behind the scenes as your quote is prepared.

What matters to you is the system interface. The factory remote coded to start the car when you press the lock button three times in short succession might be adequate if the range doesn’t matter much. If you want more range and features, your retailer can pair any of Compustar’s RF remote kits with the control module to meet your needs. If you want a simple one-button solution with two or three times as much range as the factory fob, they have it. Need two-way communication with trunk release? No problem! But if you want maximum range, two-way communication, security alerts, and much more, the Pro T13 remote is the ultimate option.

The Pro T13 is impressively compact at 2.84 inches tall, 1.57 inches wide, and only 0.44 inches deep. It features a vibrant color display that indicates whether your vehicle is locked, unlocked, or running.

Simple and Elegant Interface

The remote includes three buttons to access 50 commands and configuration settings. Locking, unlocking, or remotely starting your car is just a button press away. Double-tapping the lock or unlock buttons activates auxiliary outputs one and two. These outputs can control features like power sliding doors or rear defrost. The latter can even be configured to activate automatically if the interior temperature drops below a specific threshold. Your retailer can provide more details. Car Finder, trunk release, and much more are also easily accessible.

Compustar Pro T13
The T13 remote includes a charging cable, antenna, and all the wiring your installer needs to integrate with a Compustar remote start control module.

Class-Leading Range and Reliability

The key factor that sets the Pro T13 apart from other remote starters is its range. Range is the maximum distance from which the remote can communicate with your vehicle. Compustar specifies the Pro T13’s range at up to three miles under ideal conditions. We’ve measured the performance in real-world situations, which bested other remotes by more than 20%!

More importantly, the Pro T13’s powerful transceiver works excellently indoors. For instance, you can be at the far end of a shopping mall, in an apartment or office building, or inside a large factory and still communicate with your vehicle. This exceptional range ensures your car or truck has enough time to warm up in winter or cool down in summer long before you arrive at it.

Color Display and Two-Way Communication

The Pro T13’s two-way communication ensures reliability. When you press the lock button, the remote confirms the action with a beep and a visual indicator on the color LCD screen showing that the vehicle is locked. Unlike one-way remotes, which act like TV remotes, this feature gives you peace of mind, as you always know your vehicle’s status.

The color display not only tells you what the car is doing using intuitive icons but also shows the vehicle battery voltage, the temperature in the vehicle, and the battery level of the remote itself.

Compustar Pro T13
The Pro T13 remote offers two-way communications to ensure you always know what’s happening with your vehicle.

Proximity Unlocking Adds Convenience

Another standout feature of the Pro T13—and its smaller one-button counterpart, the Pro R5—is proximity unlocking. When you’re within five to six feet of your car or truck, the remote automatically communicates with the vehicle to unlock the doors—no need to press any buttons! Whether carrying groceries, holding a child, or juggling tonight’s pizza, this feature makes life easier.

Rechargeable Battery Pack and Rugged Design

Unlike most remotes, which use disposable coin-cell batteries, the Pro T13 features a built-in rechargeable battery. Connect the provided mini-USB cable to a USB outlet for a few hours to recharge it. You can even charge it while driving your vehicle.

This remote is as durable as possible, with an IPX-7 water resistance rating. This means it can survive being submerged in water, whether it’s a pool, puddle, or snowbank. Compustar backs the Pro T13 and other Pro Series remotes with a three-year warranty, giving you confidence in your investment.

Compustar Pro T13
The durable design of the T13 is backed by a three-year warranty.

Security System Ready for Added Protection

Are you concerned about theft or vandalism? Most Compustar remote car starters with the Pro T13 can be upgraded with advanced security features. Compustar’s alarm enhancements include a starter kill, a high-output siren, an optional horn-honk output, and a robust digital security sensor.

This sensor monitors impacts, motion, glass breakage, or vehicle tilting. If triggered, the Pro T13 remote alerts you with a loud beep and a display notification. This lets you take immediate action if needed.

Drone Smartphone Control Included

The T13 Remote kit includes the Drone smartphone control interface. Drone allows you to use the DroneMobile app on your smartphone to control your vehicle. You can lock or unlock the doors, remote start the engine, or even pop the trunk with a tap on your phone screen. You can even log into the dronemobile.com website and send commands from your desk at home or work.

The Drone can be upgraded with GPS-based location and geofence alerts. Tracking service plans are ideal if you let your kids drive the family car or want to monitor how your staff uses a company vehicle. Your local authorized Compustar retailer can explain the different service plans available.

Compustar Pro T13
The Drone smartphone control system provides effectively unlimited range and advanced tracking options to protect your vehicle.

Why Is Remote Starter Range Important

Let’s say you work in a large building like a hospital, warehouse, or factory. When you finish your shift, you can remote start your car or truck while packing up to leave. Your vehicle will have several minutes for the climate control to start making the interior more comfortable. In the winter, the rear window defroster can be activated automatically, so cleaning the car off is easier.

If the remotes that come with your car or low-cost car starters don’t have enough signal transmission power, you’ll have to wait until you are at the door or even outside in the parking lot to activate the starter. Now, you’ll have less than a minute for the engine to warm up. Inadequate range negates the benefit of having the starter.

The Ultimate Remote Starter Solution

If these features sound like the ultimate remote car starter recipe, you’re right. With industry-leading range capabilities, two-way communication, a color display, rugged durability, a rechargeable battery, and advanced security options, the Compustar Pro T13 is in a class of its own.

Visit an authorized Compustar Pro retailer today to learn how they can configure a system for maximum comfort and security. Use the Dealer Locator on Compustar’s website to find a retailer near you. Also, follow Compustar on YouTube, Facebook, and Instagram for updates on their amazing products.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Filed Under: ARTICLES, PRODUCTS, Remote Car Starters, RESOURCE LIBRARY Tagged With: Compustar

Product Spotlight: Thinkware Q200 Dash Camera

Thinkware Q200

Consumers typically have two schools of thought when it comes to dash cameras. Some want the most advanced technology and highest-resolution image sensors available. Others believe that any dash camera system is exponentially better than none. Sadly, the latter concept often leads to people buying low-quality, unreliable solutions. Sitting between these philosophies is the Thinkware Q200 dash camera system. With 2K QHD image quality on the front, 1080P FHD image quality on the rear, intelligent parking modes, and built-in Wi-Fi connectivity, this affordable system is anything but run-of-the-mill. It even includes a 32 GB microSD card! Let’s check it out!

Thinkware Q200 Front and Rear Camera System

The Thinkware Q200 dash camera system is based around the compact (3.9 x 0.9 x 1.3 inches) forward-facing camera with its Quad-HD (2506 x 1440-pixel) image sensor. The camera has a 125-degree field of view, offering a good balance of forward focus and side-approach monitoring. Videos are recorded in HEVC format using the H.264 codec to keep the file sizes manageable. As mentioned, the system includes a UHS-1 32 GB memory card but can accept cards up to 256 GB in capacity for over 800 minutes of storage.

Thinkware Q200
The included GPS receiver captures both location and speed information.

The camera includes several video processing technologies to help improve image quality. First, Super Night Vision 2.0 helps ensure clear, low-noise images in low-light situations, capturing details like license plates or street signs when it’s dark. Advanced Video Clear Technology includes High Dynamic Range (HDR) capture technology that compresses washed-out highlights while boosting information usually lost in the shadows. Smart focusing and intelligent auto exposure enhance the system’s ability to store clear, sharp videos. Finally, de-warping technology reduces barrel distortion so objects at the extreme edges of the video don’t look misshapen.

Thinkware Q200
Features like Super Night Vision 2.0 dramatically improve performance in low light levels.

The camera body has three connection ports: one connection is on top of the chassis for the power source, while one on the side is for the rear camera and one for the GPS receiver. The buttons on the rear panel activate the manual recording mode, and another provides control options for Bluetooth and Wi-Fi connectivity. You can use Wi-Fi with the free Thinkware Dash Cam Link application to download videos directly from the camera. Alternatively, you can remove the microSD card from the bottom of the chassis and use the PC viewer software to view video files.

Thinkware Q200
The compact Q200 dash camera fits neatly beside your rear-view mirror and captures everything that happens in front of the vehicle while you drive.

Rear and Optional Cameras

The rear camera included with the Q200 Front and Rear kit is even more compact (2.40 x 1.20 x 0.98 inches) and captures video in full HD (1920 x 1080 pixels). It shares the same 125-degree field of vision as the front camera and records at 30 frames per second. A 19.7-foot cable lets your installer connect the rear camera to the front camera.

Thinkware Q200
Your installer can mount the included rear camera in the back window to monitor drivers approaching from behind.

Another option is the infrared interior camera from Thinkware. This compact camera (part number TWA-NIFR) is ideal for taxi, limousine, and rideshare applications where recording what happens and what’s said inside the vehicle is important. The camera includes two compact infrared transmitters so it can effectively see in the dark.

Thinkware Q200
The optional infrared interior camera is ideal for taxis, limousines, Uber and Lyft drivers.

The Q200 is compatible with the optional multiplexer box. With this option, your installer can add three additional cameras to the system, bringing the total to five. The four cameras connected to the multiplexer combine their images into a single video feed that records on the rear channel of the Q200. Side-view and infrared interior cameras are just some options available for additional cameras.

Thinkware Q200
Thinkware offers several multiplexer bundles to add three cameras to the Q200.

Parking Mode

For those not up-to-date with dash camera lingo, the parking mode feature allows the camera to continue capturing what’s happening around your car when it’s parked. Depending on where you park, you can work with your installer to choose between two frame-per-second Time Lapse, Energy Saving, and Motion/Impact Detection options. In Motion and Impact mode, the camera monitors the image sensor for changes that indicate something or someone has entered the field of vision. When this happens, it stores a video file with 10 seconds of footage before and after the trigger. The built-in three-axis accelerometer also monitors the vehicle for motion from an impact, which triggers a similar recording.

Energy-saving mode foregoes image sensing, dramatically reducing the electrical energy required to maintain camera operation. This mode is ideal for longer-term parking recording.

Thinkware Q200
Parking mode will monitor what happens around your vehicle in the driveway or a garage.

Built-In ADAS Features

The Q200 is no slouch when it comes to bonus features. The camera includes Advanced Driver Assistance Systems (ADAS) in the form of Lane Departure Warning (LDWS), Forward Collision Warning (FCWS), and Front Vehicle Departure Warning (FVDW). These systems use artificial intelligence and advanced image processing to detect potential hazards and provide a warning to the driver. The GPS antenna must be installed for these features to function.

Protect Yourself with the Thinkware Q200

As is evident, the Thinkware Q200 dash camera system is exponentially more capable than most solutions you’ll find outside a professional mobile enhancement retailer. If you want premium image quality in the videos, advanced ADAS warnings, and easy Wi-Fi downloading, drop by your local Thinkware retailer and ask about the Q200 system. They can provide a package price for the dual camera system with expert installation to ensure reliable operation.

This article is written and produced by the team at www.BestCarAudio.com. Reproduction or use of any kind is prohibited without the express written permission of 1sixty8 media.

Filed Under: ARTICLES, Backup Safety, Driver Safety, PRODUCTS, RESOURCE LIBRARY Tagged With: Thinkware

  • « Previous Page
  • 1
  • 2
  • 3
  • 4
  • …
  • 7
  • Next Page »

Recent Articles

Wiring

The Importance of Proper Cables and Wiring

June 1, 2025 

Installing mobile electronics systems is not as easy as it used to be. In the “good old days,” cars were made from thick metal and didn’t have many electrical components. Modern … [Read More...]

DroneMobile XC Connected Dashcam Security System

Product Spotlight: DroneMobile XC Connected Dashcam Security System

May 26, 2025 

Thieves frequently target vehicles from Hyundai, Kia, Toyota, Lexus, RAM, Chevrolet, and Honda. These vehicles are often stolen for their parts or exported overseas. … [Read More...]

Compustar 2WG17 Remote Kit

Product Spotlight: Compustar 2WG17 Remote Kit

May 19, 2025 

Compustar was one of the first brands to allow consumers to choose a remote control package to accompany their remote start controller. Previously, we looked at flagship-level … [Read More...]

Car Audio Installation

Car Audio Installation – The Good, Better, Best Approach

May 4, 2025 

Installing mobile electronics in a vehicle is a balance of technical skill and creativity. From the seemingly simple task of connecting wires to the creation of a custom amp rack … [Read More...]

Compustar’s EZGO-II remote adds hands-free keyless entry to your remote car starter or security system.

Product Spotlight: Compustar EZGO-II

April 28, 2025 

Hands-free proximity unlocking is a feature found on many new cars and trucks fresh off the showroom floor. The Compustar EZGO-II adds this convenience to your remote car starter … [Read More...]

Subscribe!

Enter your email address to subscribe to our website and receive notifications of new posts by email.

Join 3 other subscribers

Testimonials

Nice staff and honor their work

Audio Crew did some work for me about 2yrs ago. A speaker they installed wasn't working properly. They checked it out and problem was a corroded wire. They fixed the problem and told me no charge for the repair. Very nice of them to do that as problem wasn't their fault in the first place. Audio Crew have a nice staff and honor their work.

VERY HONEST and PROFESSIONAL company

I purchased a 2019 used car for my wife and she wanted a remote started installed. I went to Audio Crew, who I had dealt with before, got a price and made an appointment. We dropped the car off the night before, for the appointment with a request that they call us when ready. Early the next morning, I received a call telling me that there was good news!! The car already had a remote starter which was programmed into the factory remote. We only need to press the "lock" button three times to star the car!! The dealer who sold us the car was not aware of that, it was a pleasant surprise to us and a $350 savings. THANK YOU to a VERY HONEST and PROFESSIONAL company.

Absolutely the best service

Absolutely the best service you will get anywhere. They go above and beyond! Can’t recommend them more! They fixed our issue quickly. Super friendly and helpful. Will not buy anywhere else.

Great Service

Great service, huge demo room with great prices. Very knowledgeable and professional service from the owner and will work within your budget to help you achieve your goals in the sound system your looking for. Extremely great experience dealing with them, also pricing was excellent competitive prices.

Subscribe to Our Website

Enter your email address to subscribe to our website and receive notifications of new posts by email.

Location


Get Directions to Audio Crew

Address

Audio Crew
624 Salisbury Rd
Moncton, NB E1E 1B8
Phone: 506-858-2739

Connect With Us

  • Facebook
  • Instagram

Services

  • Car Audio
  • Marine Audio
  • Motorcycle Audio
  • Remote Starters
  • UTV and Side-by-Side Upgrades

Store Hours

SundayClosed
Monday8:30 AM - 5:00 PM
Tuesday8:30 AM - 5:00 PM
Wednesday8:30 AM - 5:00 PM
Thursday8:30 AM - 5:00 PM
Friday8:30 AM - 5:00 PM
SaturdayClosed

Copyright © 2025 Audio Crew · Privacy Policy · Website by 1sixty8 media · Log in

 

Loading Comments...